Generation 4 Low Build Rod Finish

Generation 4 Low Build Rod Finish

Generation 4 guide wrap finish is quickly setting new standards in the rod building community for "on the wrap" performance. Gen4 provides the discriminating craftsman with the most robust set of performance properties in the industry. Featuring the most chemically advanced air release protocol (XAR) on the market, and now with our new UV2 ultraviolet inhibitor, Gen 4 has become the "clear choice" for high performance guide wrap coatings.

Generation 4 User Guide & Technical Data Sheet
What is XAR?
XAR stands for eXtreme Air Release, and is our version of the latest in air release protocol
technology in epoxy based casting resins. The first thing you will notice about GEN4 guide wrap finishes
is that compared to other finishes it offers greater resistance to the entrapment of bubbles due to
improper mixing. Second, air that is introduced into the mixture during the blending process is released
in a much more effective and efficient manner during application. Additionally, we have extended the
pot life of GEN4 by about 12 minutes to allow more time for air displaced in the threads to release on its
own. Of course the XAR air release chemistry is limited by the amount of time the mixed resin stays
viscous enough for bubbles to move to the surface. To that end, best practices in blending the resin and
catalyst (read; slow and deliberate) must be exercised in order to keep the amount of trapped air to a
minimum to begin with.
What is TruBlu Measure/Mix?
TruBlu Measure & Mix is an additive we put in the resin (part A) side of
the formula to help differentiate between the resin and catalyst. Several of my former OEMs noted that
the two sides were so clear that it would be easy for one to accidentally mix two parts resin or two parts
hardener instead of one of each. To alleviate any confusion, we have added a "disappearing" blue dye to
visually differentiate between the two components. Additionally it functions as a visual indicator as to
when the mixture is properly blended. If the blue hasn't completely disappeared, the mixing process is
not complete.
GEN4 Working Properties
Mix Ratio: 1:1
Pot-life: 30 min at 70 degrees Fahrenheit
Re-Coat Time: Minimum re-coat time is 4 hours at 70 degrees Fahrenheit. Maximum re-coat time is 24
hours at 70 degrees Fahrenheit
Sag free (rotation time): 3 hours at 70 degrees Fahrenheit
Tack free time: 10 hours at 70 degrees Fahrenheit
Fishable after 24 hours, but we recommend 48 hours to allow for full crosslinking
Instructions:
Measure a minimum of 3cc of each component. Mix SLOWLY AND
DELIBERATELY for a minimum of 3 minutes. If any cloudiness or hint of blue dye remains, continue
blending until mixture is water clear. Pour out on a flat surface to allow the XAR protocol to release any
remaining bubbles. Apply with brush or spatula until desired film thickness is achieved. Rotate for a
minimum of 3 hours, CONTINUALLY CHECKING for bubbles, as XAR will continue to push bubbles to the
surface even when the mixture begins to thicken. To ensure that no bubbles become trapped in the
changing surface tension, you will need to check the rod every few minutes to monitor and eliminate
any air that may not release on its own due to the thickening viscosity. XAR is only effective through a
specific viscosity. As the mixture continues to crosslink, the thickening viscosity will be the only barrier
that does not allow for the bubbles to continue to release.