Supplies & Tools
Selecting the right adhesive and rod finish is critical to a beautiful
and flawless custom build. As custom builders ourselves we have
tested and used all of the top brand products.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Flex Coat All-In-One Rod Assembly Kit
Flex Coat
$18.79It's All You Need! These Flex Coat All In One Rod Assembly Kits have all the supplies you need to assemble your rod from start to finish. Choice of finishes: High Build or Lite Formula Each Kit Contains: 24cc Flex Coat Rod Builders Epoxy Glue 4 -...$18.79 -
RodSmith Epoxy Rod Finish 2pk
Pacific Bay
$4.69RodSmith Epoxy Rod Finish 2pk Pacific Bay's 'RodSmith' rod finish in small single-use packets (enough epoxy to finish an entire rod). Ultra-Clear High Gloss UV Resistant Resilient Waterproof Contains 2 packets.$4.69 -
Flex Coat Color Preserver
Flex Coat
$4.80 - $11.30Flex Coat Color Preserver This strong, non-yellowing color preserver provides great penetration and color retention. The easy to use, non-toxic formula cleans up quickly with water. Apply 2 or 3 coats on regular thread. Apply one coat on N.C.P...$4.80 - $11.30 -
Flex Coat Mixing Kit
Flex Coat
$1.99Flex Coat Mixing Kit Safe & approved mixing cups & sticks. 10 pcs.$1.99 -
Flex Coat Epoxy Syringes
Flex Coat
$2.29FLEX COAT SYRINGES Color coded epoxy finish syringes. Each syringe holds 3cc. Safe & approved for dispensing critical amounts of resin & hardener.$2.29 -
Flex Coat Disposable Finishing Brush
Flex Coat
$0.45 - $3.10Flex Coat Disposable Finishing Brush Non-Shedding finishing brush Two sizes available: 1/8" (purple) and 1/4" (yellow) Low cost Disposable Great for applying rod finish & color preserver$0.45 - $3.10 -
Thread Pick/Burnisher Tool Wooden Handle
$3.99 - $4.99Thread Pick/Burnishing Tool 2 Sizes: Standard & Slim Deluxe wooden handled pick, also known as a thread burnishing tool Used for closing thread gaps by burnishing from outside edge of thread wrap to center Tightens wraps and squares thread...$3.99 - $4.99 -
Gingher Snips
$24.95Gingher snips The absolute best for thread cutting when wrapping guides. Featherweight- 1/2 ounce 3-1/2 inch length Stainless steel blades Includes a protective cap Great for fly tying also!$24.95 -
Flex Coat Epoxy Brush Cleaner
Flex Coat
$7.99Epoxy brush cleaner Safe & mild, 4oz.This is great stuff! This will extend the life of your quality finishing brushes 10 times.$7.99 -
Rod Rests
Custom Fly Rod Crafters
$4.95Rod Rests Wooden rod holders to keep rod blank off of work surface while wrapping & finishing, 1 pair.$4.95 -
Extreme Reamer 14"
CRB
$24.95Extreme ReamerBest commercial grade reamer available. Each reamer includes one 14" solid fiberglass tapered shaft with 50 grit abrasive sandpaper and one universal handle.Available in 3 sizes: Small - Taper: .215 to .360 - Fly and Ultra...$24.95 -
Flex Coat Rod Drying Finishing Motors
Flex Coat
$105.00 - $195.00Flex Coat Finishing Motors High quality USA built gear motors with self-adjusting chuck for rotating rod while applying and curing Flex Coat finishes. 6 RPM standard or slip clutch models for applying finish to rods with under-wraps. 18 RPM standard...$105.00 - $195.00